REMOVAL CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 3. REMOVE BATTERY (for LH Side)
(b) Loosen the nut, move the stay off the battery, and remove the battery. 4. REMOVE FRONT AIRBAG SENSOR
(b) Disconnect the connector. |
Toyota Tundra Service Manual > Rear Door Lock(for Crewmax): Inspection
INSPECTION PROCEDURE 1. INSPECT REAR DOOR LOCK ASSEMBLY LH (a) Check the door lock motor. (1) Apply battery voltage to the door lock and check operation of the door lock. OK: Measurement Condition Specified Condition Battery positive (+) → Terminal 4 (L) Battery negative (-) → Terminal 1 (UL) Lo ...