INSTALLATION PROCEDURE 1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(b) Attach the 5 hooks (B) and install the front passenger airbag on the instrument panel.
2. INSTALL NO. 3 INSTRUMENT PANEL WIRE (a) Attach the wire harness clamp to install the No. 3 instrument panel wire. (b) Connect the connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. 3. INSTALL NO. 2 INSTRUMENT PANEL WIRE (a) Attach the wire harness clamp to install the No. 2 instrument panel wire. (b) Connect the 2 connectors. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. 4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
5. INSTALL NO. 2 HEATER TO REGISTER DUCT
6. INSTALL DEFROSTER NOZZLE ASSEMBLY
7. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY HINT:
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 9. CHECK SRS WARNING LIGHT (a) Check the SRS warning light (see page ). |
Toyota Tundra Owners Manual > Specifications: Tire information
Typical tire symbols Tire size DOT and Tire Identification Number (TIN) Location of treadwear indicators Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Uniform tire quality grading For details, see "Uniform ...