ON-VEHICLE INSPECTION PROCEDURE 1. CHECK FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(b) With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel with a new one: Cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag. 2. CHECK FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(b) With the front passenger airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front passenger airbag, instrument panel or instrument panel reinforcement with a new one:
|
Toyota Tundra Service Manual > 1ur-fe Emission Control: Purge Valve
ComponentsCOMPONENTS ILLUSTRATION InspectionINSPECTION PROCEDURE 1. INSPECT PURGE VSV (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 23 to 26 Ω 1 - VSV body ground Always 10 MΩ or hi ...