ON-VEHICLE INSPECTION PROCEDURE 1. CHECK LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(b) With the lower No. 2 instrument panel airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the lower No. 2 instrument panel airbag with a new one: Cuts, minute cracks or marked discoloration on the lower No. 2 instrument panel airbag. 2. CHECK LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(b) With the lower No. 2 instrument panel airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the lower No. 2 instrument panel airbag with a new one:
CAUTION: For removal and installation procedures of the lower No. 2 instrument panel airbag, be sure to follow the correct procedure. |
Toyota Tundra Service Manual > Brake Pedal: Removal
REMOVAL PROCEDURE 1. REMOVE PRECAUTION NOTICE: After turning the ignition switch off, waiting time be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). ...