Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL OCCUPANT CLASSIFICATION ECU (a) Check that the ignition switch is OFF. (b) Check that the cable is disconnected from the battery negative (-) terminal. CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. (c) Attach the claw and install the occupant detection ECU to the front seat assembly RH. NOTICE:
(d) Check that there is no looseness in the installation parts of the occupant classification ECU. 2. INSTALL FRONT SEAT ASSEMBLY RH (a) for Manual Seat: (See page ) (b) for Power Seat: (See page ) On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. CHECK OCCUPANT DETECTION ECU (VEHICLE NOT INVOLVED IN COLLISION) (a) Perform a diagnostic system check (see page ). 2. CHECK OCCUPANT DETECTION ECU (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) (a) Perform a diagnostic system check (see page ). 3. CHECK OCCUPANT DETECTION ECU (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED) (a) Replace the ECU. CAUTION:
Removal REMOVAL PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY RH (a) for Manual Seat: (See page ) (b) for Power Seat: (See page ) 2. REMOVE OCCUPANT CLASSIFICATION ECU
(b) Detach the claw and remove the occupant classification ECU from the front seat assembly RH. |
Toyota Tundra Service Manual > Center Power Outlet Socket(for Floor Shift Type): Installation
INSTALLATION PROCEDURE 1. INSTALL POWER OUTLET SOCKET COVER (for Double Cab) (a) Attach the 2 claws to install the power outlet socket cover. 2. INSTALL POWER OUTLET SOCKET ASSEMBLY (for Double Cab) (a) Attach the claw to install the power outlet socket assembly. 3. INSTALL REAR CONSOLE END PANEL SU ...