DTC CHECK / CLEAR 1. CHECK DTC HINT:
(a) Connect the Techstream to the DLC3. (b) Turn the ignition switch ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes. 2. CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes. (e) Erase the DTCs. |
Toyota Tundra Service Manual > Sliding Roof System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are ...