Toyota Tundra Service Manual: Removal

Toyota Tundra Service Manual / Vehicle Interior / Supplemental Restraint Systems / Seat Position Sensor / Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

(a) for Manual Seat:

(See page )

(b) for Power Seat:

(See page )

2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)

3. REMOVE FRONT SEAT CUSHION SHIELD LH (for Manual Seat)

4. REMOVE SEAT POSITION AIRBAG SENSOR

(a) for Manual Seat:

(1) Disconnect the connector.

(2) Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position airbag sensor.

(b) for Power Seat:

(1) Disconnect the connector.

(2) Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position airbag sensor.
    On-vehicle Inspection

    Side Airbag Sensor(for Crewmax)

    See More:

    Toyota Tundra Service Manual > Parking Brake Assembly: Disassembly
    DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedures for the LH side and RH side. The procedures listed below are for the LH side. PROCEDURE 1. REMOVE REAR WHEEL LH 2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH (a) Remove the 2 bolts and disconnect the rear disc brake cylinder. NOT ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0101