ON-VEHICLE INSPECTION PROCEDURE 1. CHECK STEERING PAD (VEHICLE NOT INVOLVED IN COLLISION) (a) Perform a diagnostic system check (see page ). (b) With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad with a new one: Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion. 2. CHECK STEERING PAD (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) (a) Perform a diagnostic system check (see page ). (b) With the steering pad removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad or steering wheel assembly with a new one:
|
Toyota Tundra Service Manual > Automatic Transmission Unit: Components
COMPONENTS ILLUSTRATION *1 AUTOMATIC TRANSMISSION BREATHER TUBE *2 AUTOMATIC TRANSMISSION HOUSING *3 EXTENSION HOUSING DUST DEFLECTOR *4 EXTENSION HOUSING REAR OIL SEAL *5 EXTENSION HOUSING SUB-ASSEMBLY *6 OIL COOLER TUBE UNION *7 PARK/NEUTRAL POSITION SWITCH ASSEMBLY *8 TRANSMISSION CONTROL SHAFT L ...