Toyota Tundra Service Manual: Customize Parameters

Toyota Tundra Service Manual / Vehicle Interior / Theft Deterrent / Theft Deterrent System / Customize Parameters

CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE THEFT DETERRENT SYSTEM

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Wireless Door Lock.

(5) Select the setting by referring to the table below.

Wireless Door Lock

Display

Default

Content

Setting

Relevant ECU

Panic Function

ON

This function operates the theft deterrent system by continuously pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds.

ON/OFF

Main Body ECU (Multiplex Network Body ECU)
    Check For Intermittent Problems

    Data List / Active Test

    See More:

    Toyota Tundra Service Manual > Compressor: Inspection
    INSPECTION PROCEDURE 1. INSPECT COOLER COMPRESSOR ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (SSR+) - 2 (SSR-) 20°C (68°F) 65 to 125 Ω Text in Illustration *a Component without harness co ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0166