DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes. (e) Check for DTCs by following the directions on the Techstream screen. HINT: Refer to the Techstream operator's manual for further details. 2. CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes. (e) Clear the DTCs by following the directions on the Techstream screen. HINT: Refer to the Techstream operator's manual for further details. |
Toyota Tundra Service Manual > Instrument Panel Speaker(for Crewmax): Installation
INSTALLATION PROCEDURE 1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 12 Speakers) (a) Connect the connector. (b) Temporarily install the front No. 4 speaker assembly by aligning the positioning pins of the front No. 4 speaker assembly with the instrument panel. (c) Install the front No. 4 speaker ass ...
