FAIL-SAFE CHART 1. POWER WINDOW OPERATION IN FAIL-SAFE MODE HINT: If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode. (a) The power window control system prohibits the following power window operation when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal. Power Window Control System
HINT: When the pulse sensor is normal, the AUTO UP/DOWN function can be resumed by deactivating fail-safe mode. To deactivate fail-safe mode, pull up the power window switch to the AUTO UP position and hold it for at least 1 second to fully close the window from the fully open position. (b) If the LIN communication line malfunctions (communication stop), the power window control system prohibits the following operations. Master Switch
HINT: Remote up/down function does not operate. Power Window Regulator Switch (for Front Passenger Side)
|
Toyota Tundra Service Manual > Sfi System: ACIS Control Circuit
DESCRIPTION This circuit opens and closes the Intake Air Control Valve (IACV) in response to the engine load in order to increase the intake efficiency (ACIS: Acoustic Control Induction System). WIRING DIAGRAM PROCEDURE 1. PERFORM ACTIVE TEST USING TECHSTREAM (OPERATE VSV FOR ACIS) (a) Disconnect th ...