PRECAUTION
1. POWER WINDOW CONTROL SYSTEM PRECAUTIONS
NOTICE:
- The power window control system prohibits the AUTO UP/DOWN function when
the jam protection function malfunctions. Therefore, troubleshoot the power
window control system after confirming that no diagnostic codes are displayed.
- When the power window regulator or the power window regulator motor assembly
is replaced, the power window control system must be initialized.
- After a door glass or a door glass run has been replaced, the jam protection
function may operate unexpectedly when the AUTO UP function is used. In such
cases, the AUTO UP function can be resumed by repeating the following operation
at least 5 times:
- Close the power window by fully pulling up the power window switch and
holding it at the AUTO UP position.
- Open the power window by fully pushing down the power window switch.
- The jam protection function may operate unexpectedly even when the power
window control system is normal due to detection of window operation different
from the operation learned value when the door glass moving speed changes sharply
under any of the following conditions:
- A power window is opened or closed while the vehicle is driving on a
rough road.
- A power window is opened or closed while the door is being opened or
closed.
- A sharp voltage change.
|
