Adjustment ADJUSTMENT PROCEDURE 1. ADJUST WASHER NOZZLE SUB-ASSEMBLY
(c) Select a washer nozzle so that the spray is within the standard contact areas. Replace the washer nozzle with the selected one. On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE WASHER NOZZLE SUB-ASSEMBLY (a) With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched areas shown in the illustration. Standard: Washer fluid hits the windshield in the areas shown in the illustration. If the result is not as specified, replace the washer nozzle. |
Toyota Tundra Service Manual > Curtain Shield Airbag Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH and RH sides. The procedure listed below is for the LH side. PROCEDURE 1. PRECAUTION CAUTION: Be sure to read Precaution thoroughly before servicing. Click here NOTICE: After turning the ignition switch off, waiting time may be ...