DATA LIST / ACTIVE TEST 1. DATA LIST HINT: Using the Techstream to read the Data List allows values or status of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time. NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. (a) Warm up the engine. (b) Turn the ignition switch OFF. (c) Connect the Techstream to the DLC3. (d) Turn the ignition switch ON. (e) Turn the Techstream on. (f) Enter the following menus: Body / Combination Meter / Data List. (g) According to the display on the Techstream, read the "Data List". Combination Meter
|
Toyota Tundra Service Manual > 1ur-fe Cooling: Coolant
ReplacementREPLACEMENT PROCEDURE 1. REMOVE NO. 1 ENGINE UNDER COVER 2. DRAIN ENGINE COOLANT CAUTION: Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns. HINT: Collect the coolant in a containe ...
