REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 3. REMOVE CENTER LOWER INSTRUMENT COVER
4. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
5. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
6. REMOVE NO. 1 NAVIGATION WIRE
7. REMOVE NO. 1 RADIO RECEIVER BRACKET
8. REMOVE NO. 2 RADIO RECEIVER BRACKET
9. REMOVE STEREO COMPONENT TUNER ASSEMBLY
|
Toyota Tundra Service Manual > Cylinder Block: Inspection
INSPECTION PROCEDURE 1. INSPECT CYLINDER BLOCK FOR WARPAGE (a) Using a precision straightedge and feeler gauge, measure the warpage of the contact surfaces of the cylinder head gaskets. Maximum warpage: 0.07 mm (0.00276 in.) If the warpage is more than the maximum, replace the cylinder block. (b) Vi ...