REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
4. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
8. REMOVE NO. 1 NAVIGATION WIRE
9. REMOVE NO. 1 RADIO RECEIVER BRACKET
10. REMOVE NO. 2 RADIO RECEIVER BRACKET
11. REMOVE STEREO COMPONENT TUNER ASSEMBLY
|
Toyota Tundra Service Manual > Lighting System: Operation Check
OPERATION CHECK AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK (a) Turn the ignition switch to ON. (b) Turn the light control switch to the Auto position. (c) Cover the automatic light control sensor. (d) Check that the taillights and low beam headlights turn on. (e) Uncover the automatic light cont ...