REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After
turning the ignition switch off, waiting time may be required before
disconnecting the cable from the battery terminal. Therefore, make sure
to read the disconnecting the cable from the battery terminal notice
before proceeding with work (See page 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 4. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY 5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY 6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 7. REMOVE NAVIGATION RECEIVER ASSEMBLY
(c) Disconnect each connector and remove the navigation receiver assembly with bracket. 8. REMOVE NO. 1 NAVIGATION WIRE (w/ Satellite Radio)
9. REMOVE NO. 1 RADIO RECEIVER BRACKET ![]()
(a) w/ Satellite Radio: Remove the 5 bolts and No. 1 radio receiver bracket. (b) w/o Satellite Radio: Remove the 3 bolts and No. 1 radio receiver bracket. 10. REMOVE NO. 2 RADIO RECEIVER BRACKET ![]()
(a) w/ Satellite Radio: Remove the 5 bolts and No. 2 radio receiver bracket. (b) w/o Satellite Radio: Remove the 3 bolts and No. 2 radio receiver bracket. 11. REMOVE STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)
|
Toyota Tundra Service Manual > Power Tilt And Power Telescopic Steering Column System: Data List / Active Test
DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals ma ...