Toyota Tundra Service Manual: CD Sound Skips

PROCEDURE

1.

CHECK DISC

(a) Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc.

NG

CHANGE DISC

OK

2.

CHECK DISC

(a) Disc cleaning

(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.

OK

END (DISC IS DIRTY)

NG

3.

REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

OK

END (DISC IS DEFECTIVE)

NG

4.

CHECK NAVIGATION RECEIVER ASSEMBLY

(a) Check that the navigation receiver assembly is properly installed

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG (for Column Shift Type)

C

NG (for Floor Shift Type)

D

A

REPLACE NAVIGATION RECEIVER ASSEMBLY

B

REPLACE NAVIGATION RECEIVER ASSEMBLY

C

REINSTALL NAVIGATION RECEIVER ASSEMBLY

D

REINSTALL NAVIGATION RECEIVER ASSEMBLY

    Black Screen

    Cellular Phone Inspection

    See More:

    Toyota Tundra Service Manual > Network Gateway Ecu: Components
    COMPONENTS ILLUSTRATION *A for Column Shift Type - - *1 COWL SIDE TRIM BOARD RH *2 FRONT DOOR SCUFF PLATE RH *3 INSTRUMENT SIDE PANEL RH *4 LOWER INSTRUMENT PANEL *5 LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH *6 LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY *7 NETWORK GATEWAY ECU *8 NO. 2 IN ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.006