DESCRIPTION The stereo component tuner assembly sends the sound data signal or image data signal from a device to the navigation receiver assembly via this circuit. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary. PROCEDURE
(a) Disconnect the K1 and L1 navigation receiver assembly connectors. (b) Disconnect the K2 and L3 stereo component tuner assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(a) Replace the No. 1 navigation wire with a known good one. for Column Shift Type: See page for Floor Shift Type: See page (b) Check that the malfunction disappears. OK: Malfunction disappears.
|
Toyota Tundra Service Manual > Power Window Control System(w/o Jam Protection Function): Remote Up / Down Function does not Operate
DESCRIPTION With the ignition switch ON, the master switch transmits remote switch signals to the regulator switches of the front passenger door power window and rear door power windows. Then, each power window regulator switch drives its respective power window regulator motor. HINT: The front pass ...