FREEZE FRAME DATA 1. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Navigation System / Trouble Codes. (e) Select a PTC to display its Freeze Frame Data. 2. LIST OF FREEZE FRAME DATA (a) Refer to "Data List / Active Test" (See page
|
Toyota Tundra Service Manual > Brake Control / Dynamic Control Systems: Rear Speed Sensor
ComponentsCOMPONENTS ILLUSTRATION InstallationINSTALLATION PROCEDURE 1. INSTALL SKID CONTROL SENSOR WIRE (a) Install the sensor clamp with the nut (labeled A). Torque: 15 N·m {153 kgf·cm, 11 ft·lbf} NOTICE: Make sure the clamp's rotation stopper touches the installation position. (b) Install the ...
).
