Toyota Tundra Service Manual: Illumination for Panel Switch does not Come on with Tail Switch ON

Toyota Tundra Service Manual / Audio, Visual, Telematics / Navigation / Multi Info Display / Navigation System / Illumination for Panel Switch does not Come on with Tail Switch ON

PROCEDURE

1.

CHECK VEHICLE SIGNAL (OPERATION CHECK)

(a) Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page )]

(b) Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation.

OK:

Light Control Switch

Display

Tail or head

ON

Off

OFF

HINT:

This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

(c) Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the light control switch operation.

OK:

Light Control Switch

Display

Tail or head

DIM

Off

BRIGHT

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG

C

A

REPLACE NAVIGATION RECEIVER ASSEMBLY

B

REPLACE NAVIGATION RECEIVER ASSEMBLY

C

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Illumination Circuit

    Microphone Circuit between Microphone and Navigation Receiver Assembly

    See More:

    Toyota Tundra Service Manual > Air Conditioning System(for Manual Air Conditioning System): Multiplex Communication Circuit (B1499/99)
    DESCRIPTION This DTC outputs when CAN communication error is occurred. DTC Code DTC Detection Condition Trouble Area B1499/99 Open in CAN communication circuit CAN communication system PROCEDURE 1. CHECK FOR DTC (a) Clear the DTC (see page ). (b) Check for DTC (see page ). Result Result Proceed to D ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0309