DESCRIPTION This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.
CAUTION / NOTICE / HINT NOTICE: When checking for DTCs, make sure that the blind spot monitor system is turned on. PROCEDURE
(a) Clear the DTCs (See page
(b) Recheck for DTCs and check if the same DTC is output again (See page
OK: No DTCs are output.
|
Toyota Tundra Service Manual > Touch Select 2-4 And High-low System: Terminals Of Ecu
TERMINALS OF ECU 1. CHECK 4 WHEEL DRIVE CONTROL ECU Text in Illustration *a Component with harness connected (4 Wheel Drive Control ECU) - - (a) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description Condition Specifie ...