Toyota Tundra Service Manual: Terminals Of Ecu

Toyota Tundra Service Manual / Audio, Visual, Telematics / Park Assist / Monitoring / Blind Spot Monitor System / Terminals Of Ecu

TERMINALS OF ECU

1. BLIND SPOT MONITOR SENSOR RH (MASTER)

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
S6-4 (OMIR) - S6-10 (BRGD)	L - W-B	Outer rear view mirror indicator power source signal RH	Outer rear view mirror indicator illuminated	3.5 to 9.5 V
			Outer rear view mirror indicator blinks	Alternating between 0 to 9.5 V
			Outer rear view mirror indicator not illuminated	Below 1 V
S6-5 (BRB) - S6-10 (BRGD)	Y - W-B	IG power source signal	Ignition switch off	Below 1 V
S6-5 (BRB) - S6-10 (BRGD)	Y - W-B	IG power source signal	Ignition switch ON	11 to 14 V
S6-10 (BRGD) - Body Ground	W-B - Body ground	Ground	Always	Below 1 Ω

2. BLIND SPOT MONITOR SENSOR LH (SLAVE)

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
S5-3 (BUZ) - S5-10 (BLGD)	G - W-B	RCTA buzzer (blind spot monitor buzzer) operation signal	RCTA buzzer (blind spot monitor buzzer) not sounding	11 to 14 V
S5-3 (BUZ) - S5-10 (BLGD)	G - W-B	RCTA buzzer (blind spot monitor buzzer) operation signal	RCTA buzzer (blind spot monitor buzzer) sounding	Alternating between 0 to 14 V
S5-4 (OMIL) - S5-10 (BLGD)	V - W-B	Outer rear view mirror indicator power source signal LH	Outer rear view mirror indicator illuminated	3.5 to 9.5 V
			Outer rear view mirror indicator blinks	Alternating between 0 to 9.5 V
			Outer rear view mirror indicator not illuminated	Below 1 V
S5-5 (BLB) - S5-10 (BLGD)	BR - W-B	IG power source signal	Ignition switch off	Below 1 V
S5-5 (BLB) - S5-10 (BLGD)	BR - W-B	IG power source signal	Ignition switch ON	11 to 14 V
S5-10 (BLGD) - Body Ground	W-B - Body ground	Ground	Always	Below 1 Ω

System Diagram

Lost Communication with ECM / PCM "A" (U0100,U0125,U0126,U0129,U0142)

See More:

Toyota Tundra Service Manual > Starter(for 1.6 Kw Type): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY (a) Apply high temperature grease to the areas of the starter pinion drive lever indicated in the illustration. (b) Install the starter pinion drive lever and rubber seal to the starter center bearing clutch. (c) Install the ...

Toyota Tundra Service Manual: Terminals Of Ecu

System Diagram

Lost Communication with ECM / PCM "A" (U0100,U0125,U0126,U0129,U0142)

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual