DESCRIPTION The No. 1 ultrasonic sensor sends and receives ultrasonic waves. Based on the received wave, the sensor calculates the approximate distance value between the vehicle and the obstacle, and sends the distance value as a signal to the clearance warning ECU assembly. WIRING DIAGRAM ![]() PROCEDURE
(a) Remove the No. 1 ultrasonic sensor (front corner sensor LH) (See page
(b) Inspect the No. 1 ultrasonic sensor (front corner sensor LH) (See page
(a) Disconnect the C1 No. 1 ultrasonic sensor (front corner sensor LH) connector. (b) Disconnect the B1 No. 1 ultrasonic sensor (front corner sensor RH) connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Tundra Service Manual > Tire Pressure Warning Valve And Transmitter: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL 2. REMOVE REAR WHEEL 3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER (a) Remove the cap and valve core to release the air from the tire. NOTICE: Keep the removed cap. (b) After ensuring that a sufficient amount of air has been released, remove the nut an ...