DESCRIPTION The sonar ON/OFF indicator light and warning indicator lights are installed in the combination meter assembly. WIRING DIAGRAM PROCEDURE
(a) Disconnect the J35 clearance warning ECU assembly connector. (b) Disconnect the J28 combination meter assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(a) Replace the combination meter assembly with a normally functioning or new one (See page
(b) Check that the multi-information display in the combination meter assembly operates normally. OK: Multi-information display in the combination meter assembly operates normally.
|
Toyota Tundra Service Manual > Heated Oxygen Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT CAUTION: The procedures should be performed by at least 2 people. Wear protective gloves when removing the exhaust pipe assembly. The exhaust pipe assembly is extremely hot immediately after the engine has stopped. Confirm that the exhaust pipe assembly has cooled dow ...