Toyota Tundra Service Manual: How To Proceed With Troubleshooting

Toyota Tundra Service Manual / Audio, Visual, Telematics / Park Assist / Monitoring / Rear View Monitor System(for Navigation Receiver Type) / How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

Use these procedures to troubleshoot the rear view monitor system.

PROCEDURE

1.	VEHICLE BROUGHT TO WORKSHOP

2.	CUSTOMER PROBLEM ANALYSIS

3.	CHECK DTC OF NAVIGATION SYSTEM

(a) Refer to DTC Check/Clear procedures of the navigation system.

Click here

Result	Proceed to
DTC is not output	A
DTC is output	B

GO TO NAVIGATION SYSTEM

4.	PROBLEM SYMPTOM CONFIRMATION

Result	Proceed to
Symptom does not occur	A
Symptom occurs	B

GO TO STEP 6

5.	SYMPTOM SIMULATION

6.	CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM

(a) Refer to the navigation system.

Click here

Result	Proceed to
Symptom does not appear	A
Symptom appears	B

FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING

7.	PROBLEM SYMPTOMS TABLE

(a) Refer to the Problem Symptoms Table.

Click here

Result	Proceed to
Fault is not listed in problem symptoms table	A
Fault is listed in problem symptoms table	B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

8.	BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW

(a) Terminals of ECU.

Click here

9.	ADJUST, REPAIR OR REPLACE

10.	CONFIRMATION TEST

END

Dtc Check / Clear

Image from Camera for Rear View Monitor is Abnormal

See More:

Toyota Tundra Owners Manual > Steps to take in an emergency: If you have a flat tire
Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. WARNING■If you have a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair, which could result in an ...