REASSEMBLY PROCEDURE 1. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY (a) Using a T30 "TORX" wrench, install the actuator bracket with the 3 screws. Torque: 9.5 N·m {97 kgf·cm, 84 in·lbf} |
Toyota Tundra Service Manual > Lumbar Support Adjuster Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY LH (See page ) 2. REMOVE FRONT SEAT CUSHION SH ...
