DESCRIPTION This DTC is stored when a malfunction is detected in the vehicle stability control system. Check the vehicle stability control system when DTC C13A9 is stored.
CAUTION / NOTICE / HINT NOTICE: The trailer brake control system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting. Click here
PROCEDURE
HINT: Trailer brake control system DTC C13A9 may be stored due to a malfunction in the vehicle stability control system. Therefore, it is necessary to check for and troubleshoot vehicle stability control system DTCs first. (a) Check for DTCs. Click here
(a) Clear the DTCs. Click here (b) Turn the ignition switch off. (c) Turn the ignition switch to ON. (d) Check if the same DTC is output. Click here
|
Toyota Tundra Service Manual > Transmission Wire: Inspection
INSPECTION PROCEDURE 1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR) (a) Measure the resistance according to the value(s) in the table below. HINT: If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decre ...
