Toyota Tundra Service Manual: Inspection

Toyota Tundra Service Manual / Brake / Brake Control / Dynamic Control Systems / Vsc Off Switch / Inspection

INSPECTION

PROCEDURE

1. INSPECT VSC OFF SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

Tester Connection

Switch Condition

Specified Condition

6 - 9

Pressed

Below 1 Ω

Not pressed

10 kΩ or higher

If the result is not as specified, replace the VSC OFF switch.
    Components

    Installation

    See More:

    Toyota Tundra Owners Manual > Adjusting the steering wheel and mirrors: Steering wheel
    Adjustment procedure (manually adjustable type) 1. Hold the steering wheel and push the lever down. Vehicles with front bench type seat 2. Adjust to the ideal position by moving the steering wheel. After adjustment, pull the lever up to secure the steering wheel. Vehicles with front separate type se ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0099