ON-VEHICLE INSPECTION PROCEDURE 1. CHECK BRAKE FLUID LEVEL IN RESERVOIR  (a) Check the fluid level and add fluid if necessary. Fluid: SAE J1703 or FMVSS No. 116 DOT3 HINT: The brake fluid level must always be adjust to the MAX line. |
Toyota Tundra Service Manual > Ignition System: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. PERFORM SPARK TEST (a) Check for DTCs (See page ). NOTICE: If any DTC is present, perform troubleshooting procedures for that DTC. (b) Check if sparks occur. (1) Remove the ignition coils and spark plugs (See page ). (2) Install the spark plug to the ignition coil ...
