Toyota Tundra Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL MASTER CYLINDER RESERVOIR GROMMET

(a) Apply a light coat of lithium soap base glycol grease to 2 new grommets and install them onto the master cylinder body.

2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

(a) Install the master cylinder reservoir onto the master cylinder body.

(b) Using a T25 "TORX" socket wrench, install the screw.

Torque:

5.5 N·m {56 kgf·cm, 49 in·lbf}

Toyota Tundra Service Manual > Sfi System: Oxygen (A/F) Sensor Heater Control Circuit Low (Bank 1 Sensor 1) (P0031,P0032,P0051,P0052,P101D,P103D)
DESCRIPTION Refer to DTC P2195 (See page ). HINT: Although the DTC titles say oxygen sensor, these DTCs relate to the Air-Fuel Ratio (A/F) sensor. Sensor 1 refers to the sensor mounted in front of the Three-Way Catalytic Converter (TWC) and located near the engine assembly. When one of these DTCs is ...

Toyota Tundra Owners Manual