INSTALLATION PROCEDURE 1. INSTALL FAN (a) Install the fan to the fluid coupling with the 4 nuts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} 2. INSTALL FAN SHROUD (a) Install the fan pulley to the fan bracket. (b) Place the fan shroud together with the fluid coupling fan between the radiator and engine. NOTICE: Be careful not to damage the radiator core (c) Temporarily install the fluid coupling fan to the fan bracket with the 4 nuts. Tighten the nuts as much as possible by hand.
(e) Install the shroud with the 2 bolts. Torque: 6.5 N·m {66 kgf·cm, 58 in·lbf} (f) Connect the reservoir hose to the upper radiator tank. (g) Install the fan and generator V-belt (See page ).
3. INSTALL INLET RADIATOR HOSE
4. INSTALL AIR CLEANER ASSEMBLY
5. ADD ENGINE COOLANT
6. INSPECT FOR COOLANT LEAK
7. INSTALL V-BANK COVER SUB-ASSEMBLY
8. INSTALL NO. 1 ENGINE UNDER COVER
|
Toyota Tundra Service Manual > Exhaust Pipe: Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE MONOLITHIC CONVERTER PROTECTOR (for Bank 1) (a) Remove the 4 bolts, 4 nuts, lower monolithic converter protector, upper monolithic converter protector, 2 No. 1 converter protector stays and 2 No. 2 converter protector stays from the front No. 2 exhaust pipe assembly. ...