ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT FOR COOLANT LEAK HINT:
(a) Visually check the water pump assembly. (1) Check that engine coolant is not dripping from the water pump assembly. HINT:
(b) Inspect the area around the water pump assembly. HINT: Check for deposits around the drain hole of the water pump assembly.
2. INSPECT WATER PUMP ASSEMBLY (a) Remove the fan and generator V belt (See page
(c) Install the fan and generator V belt (See page
|
Toyota Tundra Service Manual > Pre-collision System: Brake Control Signal Mismatch (C1A69)
DESCRIPTION The skid control ECU (brake actuator assembly) sends signals to the millimeter wave radar sensor assembly according to the brake control status. If the millimeter wave radar sensor assembly receives a vehicle stability control system malfunction signal from the skid control ECU (brake ac ...