Toyota Tundra Service Manual: Inspection

Toyota Tundra Service Manual / Engine, Hybrid System / 1ur-fe Emission Control / Air Pump / Inspection

INSPECTION

PROCEDURE

1. INSPECT AIR PUMP ASSEMBLY

(a) Check the heater resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1 (APH+) - 3 (APHG)	-20°C (-4°F)	4.4 to 20.0 Ω
	-10°C (14°F)	3.9 to 18.0 Ω
	0°C (32°F)	3.5 to 16.0 Ω
	10°C (50°F)	3.2 to 15.0 Ω
	20°C (68°F)	3.0 to 14.0 Ω

Text in Illustration

*a	Component without harness connected (Air Pump Assembly)

If the result is not as specified, replace the air pump assembly.

See More:

Toyota Tundra Service Manual > Wf1am Transfer: Transfer Oil
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. CHECK TRANSFER OIL (a) Remove the transfer case plug (filler). (b) Check that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the transfer case plug (filler) hole. If the result is not as specified, add Toyota Genu ...

Toyota Tundra Service Manual: Inspection

Components

Installation

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual