Toyota Tundra Service Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL AIR SWITCHING VALVE ASSEMBLY

(a) Install a new gasket and the air switching valve assembly with the 3 bolts.

Torque:

24 N·m {245 kgf·cm, 18 ft·lbf}

Text in Illustration

*1	Air Switching Valve Assembly
*2	No. 3 Air Tube
*a	Claw

NOTICE:

Make sure the gasket's claws are not caught between the air switching valve assembly and No. 3 air tube.

(b) Install the 2 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(c) Attach the wire harness clamp to the air switching valve assembly and connect the air switching valve assembly connector.

2. CONNECT NO. 1 AIR HOSE

(a) Align the paint mark with the projection and connect the No. 1 air hose, and slide the clamp to secure the hose.

Text in Illustration

*a	Paint Mark
*b	Projection

HINT:

Make sure the direction of the hose clamp is as shown in the illustration.

3. CONNECT NO. 3 VENTILATION HOSE

(a) Connect the No. 3 ventilation hose, and slide the clamp to secure the hose.

Text in Illustration

HINT:

The direction of the hose clamp is indicated in the illustration.

4. INSTALL AIR CLEANER HOSE ASSEMBLY

5. INSTALL V-BANK COVER SUB-ASSEMBLY

Toyota Tundra Service Manual > Forward Recognition Camera System: Yaw Rate Sensor Circuit (C1AA4,C1AA5)
DESCRIPTION The forward recognition camera receives vehicle stability signals from the yaw rate and acceleration sensor (airbag sensor assembly). If the yaw rate and acceleration sensor (airbag sensor assembly) detects an abnormal yaw rate sensor signal or yaw rate sensor power supply voltage, it in ...

Toyota Tundra Owners Manual