Toyota Tundra Service Manual: Removal

REMOVAL

PROCEDURE

1. REMOVE V-BANK COVER SUB-ASSEMBLY

2. REMOVE AIR CLEANER HOSE ASSEMBLY

3. DISCONNECT NO. 3 VENTILATION HOSE

(a) Slide the clamp and disconnect the No. 3 ventilation hose.

4. DISCONNECT NO. 1 AIR HOSE

(a) Slide the clamp and disconnect the No. 1 air hose.

5. REMOVE AIR SWITCHING VALVE ASSEMBLY

(a) Detach the wire harness clamp and disconnect the air switching valve assembly connector from the air switching valve assembly.

(b) Remove the 2 bolts.

(c) Remove the 3 bolts, air switching valve assembly and gasket.

NOTICE:

Be careful not to damage the installation surface of the gaskets.

    Installation

    Canister

    See More:

    Toyota Tundra Owners Manual > Operating the lights and wipers: Windshield wipers and washer
    Operating the wiper lever The wipers or washer operates by operating the lever as follows: Vehicles without intermittent type (U.S.A.) or (Canada) Off (U.S.A.) or (Canada) Low speed windshield wiper operation   (U.S.A.) or (Canada) High speed windshield wiper operation (U.S.A.) or (Canada) Temp ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0173