Inspection INSPECTION PROCEDURE 1. INSPECT FUEL TANK CAP ASSEMBLY (a) Visually check if the cap and/or gasket are deformed or damaged.  Text in Illustration
If the result is not as specified, replace the fuel tank cap assembly or gasket.  NOTICE: Confirm that ID mark S is printed on the replacement fuel tank cap. Text in Illustration
|
Toyota Tundra Service Manual > Center Airbag Sensor Assembly(for Floor Shift Type): Installation
INSTALLATION PROCEDURE 1. INSTALL AIRBAG SENSOR ASSEMBLY (a) Check that the ignition switch is off. (b) Check that the cable is disconnected from the negative (-) battery terminal. CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the S ...
