Toyota Tundra Service Manual: On-vehicle Inspection

Toyota Tundra Service Manual / Engine, Hybrid System / 1ur-fe Engine Control / Air Fuel Ratio Sensor / On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT AIR FUEL RATIO SENSOR

(a) Disconnect the 2 air fuel ratio sensor connectors.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (HA1A) - 2 (+B)

(for Bank 1)

20°C (68°F)

1.6 to 3.2 Ω

1 (HA2A) - 2 (+B)

(for Bank 2)
Text in Illustration

*A

for Bank 1

*B

for Bank 2

*a

Component without harness connected

(Air Fuel Ratio Sensor)

If the result is not as specified, replace the air fuel ratio sensor.

(c) Connect the 2 air fuel ratio sensor connectors.

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Vehicle Stability Control System: Slip Indicator Light Remains ON
    DESCRIPTION The skid control ECU (brake actuator assembly) is connected to the combination meter assembly via CAN communication. The slip indicator light blinks during VSC and/or TRAC operation. If a malfunction is detected, the slip indicator light comes on to warn the driver. Click here WIRING DIA ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0374