Toyota Tundra Owners Manual: Preparations to use wireless communication

Toyota Tundra Owners Manual / Multimedia / Connecting Bluetooth / Preparations to use wireless communication

The following can be performed using Bluetooth wireless communication:
  • A portable audio player can be operated and listened to via multimedia system
  • Hands-free phone calls can be made via a cellular phone

In order to use wireless communication, register and connect a Bluetooth device by performing the following procedures.

■About Bluetooth The Bluetooth word mark and logos are registered trademarks owned Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license.

Other trademarks and trade names are those of their respective owners.

Connecting Bluetooth

Registering and connecting from the "Bluetooth Setup" screen

To display the screen shown below, press the "SETUP" button and select "Bluetooth" on the "Setup" screen.

  1. Select to connect the device to be used with multimedia system.
  2. Select to register a Bluetooth device to be used with multimedia system.
  3. Select to set detailed Bluetooth system settings.
  4. Select to delete registered devices.

Connecting Bluetooth

Registering a Bluetooth audio player for the first time

To use the Bluetooth Audio, it is necessary to register an audio player with the system.

Once the player has been registered, it is possible to use the Bluetooth Audio.

This operation cannot be performed while driving.

For details about registering a Bluetooth device.

1. Turn the Bluetooth connection setting of your audio player on.

This function is not available when the Bluetooth connection setting of your audio player is set to off.

2. Press the "AUDIO" button.

3. Select " Audio" on the "Select Audio Source" screen.

4. Follow the steps in "How to registering a Bluetooth device" from step 2.

Registering a Bluetooth phone for the first time

To use the hands-free system, it is necessary to register a Bluetooth phone with the system.

Once the phone has been registered, it is possible to use the hands-free system.

For details about registering a Bluetooth device.

1. Turn the Bluetooth connection setting of your cellular phone on.

2. Press the button.

3. Select "YES" to register a phone.

4. Follow the steps in "How to registering a Bluetooth device" from step 3.

Registering a Bluetooth device

Bluetooth compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 Bluetooth devices.

How to register a Bluetooth device

1. Display the "Bluetooth Setup" screen.

2. Select "Add".

3. When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth device.

For details about operating the Bluetooth device, see the manual that comes with it.

To cancel the registration, select "Cancel".

Connecting Bluetooth

4. Register the Bluetooth device using your Bluetooth device.

A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth devices. Depending on the type of Bluetooth device being connected, a message confirming registration may be displayed on the Bluetooth device's screen. Respond and operate the Bluetooth device according to the confirmation message.

5. Check that this screen is displayed when registration is complete.

Connecting Bluetooth

6. Select "OK" when the connection status changes from "Connecting..." to "Connected".

If an error message is displayed, follow the guidance on the screen to try again.

Registration can be performed from screens other than the "Bluetooth Setup" screen.

■ When registering from the "Bluetooth Audio" screen

1. Display the "Bluetooth Audio" screen.

2. Select "Select Device".

3. Follow the steps in "How to registering a Bluetooth device" from step 2.

Deleting a Bluetooth device

1. Display the "Bluetooth Setup" screen.

2. Select "Remove".

3. Select the desired device.

4. A confirmation message will be displayed, select "Yes" to delete the device.

5. Check that a confirmation screen is displayed when the operation is complete.

    Connecting Bluetooth

    Connecting a Bluetooth device

    See More:

    Toyota Tundra Service Manual > Exhaust Pipe: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 2) (a) Install the 4 No. 1 converter protector stays to the front exhaust pipe assembly. (b) Install the lower No. 1 monolithic converter protector and upper No. 1 monolithic converter protector with the 4 bolts and 4 nut ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.012