REMOVAL PROCEDURE 1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (a) Remove the exhaust manifold LH (See page ). 2. REMOVE CAMSHAFTS (for Bank 1) (a) Remove the camshafts (See page ). 3. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY (a) Remove the 16 valve rocker arms from the cylinder head. HINT: Arrange the removed parts in the correct order. 4. REMOVE VALVE LASH ADJUSTER ASSEMBLY (a) Remove the 16 valve lash adjusters from the cylinder head. HINT: Arrange the removed parts in the correct order. 5. REMOVE VALVE STEM CAP (a) Remove the 16 valve stem caps from the cylinder head. HINT: Arrange the removed parts in the correct order. 6. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH
7. REMOVE CYLINDER HEAD GASKET LH |
Toyota Tundra Service Manual > Navigation System: Illumination for Panel Switch does not Come on with Tail Switch ON
PROCEDURE 1. CHECK VEHICLE SIGNAL (OPERATION CHECK) (a) Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page )] (b) Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation. OK: Light Control Swi ...