INSPECTION PROCEDURE 1. INSPECT FUEL INJECTOR ASSEMBLY
(b) Inspect the injection volume. CAUTION: This test involves high-pressure fuel and electricity. Take all precautions regarding safe handling of both the fuel and the electricity. Perform this test in a safe area, and avoid any sparks or flames. Do not smoke.
(2) Disconnect the No. 1 fuel pipe sub-assembly (for Quick Type B) (See page ).
(5) Install SST and the tube to the fuel injector assembly. SST: 09268-31014 09268-41300 09268-41500 09268-41600 09268-41700
(7) Check that SST (clamp) and SST (adapter) cannot be easily separated. (8) Put the injector into a graduated cylinder. CAUTION: Install a strong rubber tube onto the injector to prevent gasoline from splashing. NOTICE:
(9) Operate the fuel pump (turn the ignition switch to ON).
(c) Check for leakage.
|
Toyota Tundra Service Manual > Pre-collision System Warning Buzzer: Installation
INSTALLATION PROCEDURE 1. INSTALL SKID CONTROL BUZZER ASSEMBLY (a) Connect the connector. NOTICE: Securely connect the connector. (b) Attach the clamp to install the skid control buzzer assembly. NOTICE: Securely insert the clamp into the bracket of the instrument panel reinforcement. If the buzzer ...