Toyota Tundra Service Manual: Fuel Pump Ecu

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP ECU

(a) Install the fuel pump ECU with the nut.

Torque:

31 N·m {316 kgf·cm, 23 ft·lbf}

NOTICE:

Do not use the fuel pump ECU if it has been subjected to physical shocks, such as being dropped, etc.

(b) Connect the fuel pump ECU connector.

(1) Connect the fuel pump ECU connector.*1

(2) Rotate the lever in the direction of the arrow until a "click" sound is heard.*2

Removal

REMOVAL

PROCEDURE

1. REMOVE FUEL PUMP ECU

(a) Disconnect the fuel pump ECU connector.

(1) Press the claw and move the lever in the direction of the arrow in the illustration.*1

(2) Disconnect the fuel pump ECU connector.*2

(b) Remove the nut and fuel pump ECU.

NOTICE:

Make sure the fuel pump ECU is not subjected to physical shocks, such as being dropped, etc.

    Fuel Pressure Regulator

    Fuel Pump

    See More:

    Toyota Tundra Service Manual > Audio And Visual System: AV Signal Stoppage (Low Battery Voltage) (B158F)
    DESCRIPTION This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the radio and display receiver assembly dropping temporarily. DTC Code DTC Detection Condition Trouble Area B158F A video or audio signal is interrupted when the battery voltage drops. Radio an ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0123