INSPECTION PROCEDURE 1. INSPECT FUEL PUMP (a) Inspect the resistance of the fuel pump. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the fuel pump. (b) Inspect the operation of the fuel pump. (1) Connect the battery's positive (+) lead to terminal 1 of the connector, and the negative (-) lead to terminal 2. Check that the fuel pump operates. NOTICE:
If the result is not as specified, replace the fuel pump. |
Toyota Tundra Service Manual > Sliding Roof: Sliding Roof Switch Assembly(for Crewmax)
Components COMPONENTS ILLUSTRATION Inspection INSPECTION PROCEDURE 1. INSPECT SLIDE ROOF MOTOR SWITCH (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Switch Condition Specified Condition 1 (UP) - 5 (E) Tilt switch is pressed to up Below ...