Toyota Tundra Service Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. FIX OIL PUMP ASSEMBLY

(a) Place the oil pump body on the torque converter clutch.

2. REMOVE CLUTCH DRUM OIL SEAL RING

(a) Remove the 3 oil seal rings.

3. REMOVE STATOR SHAFT ASSEMBLY

(a) Remove the 14 bolts, and then remove the stator shaft from the oil pump body.

4. REMOVE FRONT OIL PUMP BODY O-RING

(a) Remove the O-ring from the oil pump body.

(b) Remove the oil pump body from the torque converter clutch.

5. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

6. INSPECT STATOR SHAFT ASSEMBLY

7. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY

8. REMOVE FRONT OIL PUMP DRIVE GEAR

9. REMOVE FRONT OIL PUMP DRIVEN GEAR

10. REMOVE FRONT OIL PUMP OIL SEAL

(a) Using a screwdriver, pry out the oil seal.

NOTICE:

Be careful not to damage the bushing and oil pump body.

    Components

    Inspection

    See More:

    Toyota Tundra Owners Manual > For safe use: Seat belts
    Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder. Position the lap belt as low as possible ove ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2021 Copyright www.ttundra.com
    0.0181