Toyota Tundra Service Manual: Freeze Frame Data

Toyota Tundra Service Manual / Engine, Hybrid System / Cruise Control / Cruise Control System / Freeze Frame Data

FREEZE FRAME DATA

CHECK FREEZE FRAME DATA

HINT:

The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

(e) From the DTC screen, select the DTCs (with snow icon) for which freeze frame data is recorded.

LIST OF FREEZE FRAME DATA

Powertrain > Cruise Control

Tester Display

Cruise Vehicle Speed

Cruise Memory Vehicle Speed

Cruise Request Throttle Opening Angle

Cruise Target Acceleration

Driving Support ECU Target Acceleration

Cruise Request Driving Force

Cruise Request Driving Force Feedback Status

Cruise Control Permission Condition

Cruise Control Condition

Cruise Main Switch Operation Condition

Accelerator Pedal

Stop Light Switch Sub-CPU

Request Manual Cancel

Request Automatic Cancel

Cruise Brake Control Decision

Cruise Brake Control Permission Condition

Brake Cancel Switch
    Fail-safe Chart

    How To Proceed With Troubleshooting

    See More:

    Toyota Tundra Service Manual > Steering Column Assembly(for Manual Tilt): Disassembly
    DISASSEMBLY CAUTION / NOTICE / HINT NOTICE: When using a vise, do not overtighten it. PROCEDURE 1. REMOVE TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) (a) Using a screwdriver, widen the claws attached to the upper bracket by approximately 1.0 mm (0.0394 in.). (b) Pull out the transponder ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0097