Toyota Tundra Service Manual: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

NOTICE:

  • Before replacing the ECM, refer to Registration.

    Click here

  • When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.

    Click here

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, be sure to perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust.

    Click here

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Dynamic Radar Cruise Control System

Symptom

Suspected Area

Link

The dynamic radar cruise control system cannot be turned on using the cruise control main switch (ON-OFF button)

CAN communication system

Cruise control switch circuit

Cruise main indicator light circuit

Combination meter assembly

Millimeter wave radar sensor assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

The dynamic radar cruise control mode cannot be changed between vehicle-to-vehicle distance control mode and constant speed control mode

CAN communication system

Cruise control switch circuit

Combination meter assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

The vehicle-to-vehicle distance cannot be changed

CAN communication system

Distance control switch circuit

Combination meter assembly

Millimeter wave radar sensor assembly

Vehicle speed setting cannot be performed (in constant speed control mode)

Fail-safe chart

CAN communication system

Cruise control switch circuit

Stop light switch circuit

Automatic transmission system (for A760E)

Automatic transmission system (for A760F)

Automatic transmission system (for AB60E)

Automatic transmission system (for AB60F)

Vehicle stability control system

Millimeter wave radar sensor assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Vehicle speed setting cannot be performed (in vehicle-to-vehicle distance control mode)

Perform millimeter wave radar sensor assembly adjustment*

Fail-safe chart

Forward recognition camera is temporarily unavailable

Millimeter wave radar sensor is dirty

Millimeter wave radar sensor assembly beam axis not adjusted

CAN communication system

Cruise control switch circuit

Automatic transmission system (for A760E)

Automatic transmission system (for A760F)

Automatic transmission system (for AB60E)

Automatic transmission system (for AB60F)

Millimeter wave radar sensor assembly

Forward recognition camera

Vehicle stability control system

Combination meter assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Control of vehicle speed by the dynamic radar cruise control system is canceled (in constant speed control mode)

Fail-safe chart

CAN communication system

Cruise control switch circuit

Stop light switch circuit

Automatic transmission system (for A760E)

Automatic transmission system (for A760F)

Automatic transmission system (for AB60E)

Automatic transmission system (for AB60F)

Vehicle stability control system

Millimeter wave radar sensor assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Control of vehicle speed by the dynamic radar cruise control system is canceled (in vehicle-to-vehicle distance control mode)

Perform millimeter wave radar sensor assembly adjustment*

Fail-safe chart

Forward recognition camera is temporarily unavailable

Millimeter wave radar sensor is dirty

Millimeter wave radar sensor assembly beam axis not adjusted

CAN communication system

Cruise control switch circuit

Automatic transmission system (for A760E)

Automatic transmission system (for A760F)

Automatic transmission system (for AB60E)

Automatic transmission system (for AB60F)

Millimeter wave radar sensor assembly

Forward recognition camera

Vehicle stability control system

Combination meter assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Hunting/vehicle speed is not constant (in constant speed control mode)

CAN communication system

Vehicle stability control system

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Hunting/vehicle speed is not constant (in vehicle-to-vehicle distance control mode)

Millimeter wave radar sensor assembly is dirty

Millimeter wave radar sensor assembly beam axis not adjusted

CAN communication system

Vehicle stability control system

Millimeter wave radar sensor assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Pulling the cruise control main switch to CANCEL does not cancel control of vehicle speed by the dynamic radar cruise control system

Cruise control switch circuit

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Moving the shift lever does not cancel control of vehicle speed by the dynamic radar cruise control system

Park/neutral position switch assembly (for A760E)

Park/neutral position switch assembly (for A760F)

Park/neutral position switch assembly (for AB60E)

Park/neutral position switch assembly (for AB60F)

Shift lock control unit assembly (for A760E) (for Column shift type)

Shift lock control unit assembly (for A760E) (for Floor shift type)

Shift lock control unit assembly (for A760F) (for Column shift type)

Shift lock control unit assembly (for A760F) (for Floor shift type)

Shift lock control unit assembly (for AB60E) (for Column shift type)

Shift lock control unit assembly (for AB60E) (for Floor shift type)

Shift lock control unit assembly (for AB60F) (for Column shift type)

Shift lock control unit assembly (for AB60F) (for Floor shift type)

Automatic transmission system (for A760E)

Automatic transmission system (for A760F)

Automatic transmission system (for AB60E)

Automatic transmission system (for AB60F)

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Depressing the brake pedal does not cancel control of vehicle speed by the dynamic radar cruise control system

Stop light switch circuit

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Even though the millimeter wave radar sensor is not dirty, the warning message "Clean Sensor" is displayed

Millimeter wave radar sensor assembly

The vehicle approach warning buzzer does not sound

Skid control buzzer circuit

Check millimeter wave radar sensor assembly installation position

Check installation of forward recognition camera

Forward recognition camera

Millimeter wave radar sensor assembly

Even though the vehicle approach warning buzzer is sounding, brake control is not performed when decelerating

CAN communication system

Vehicle stability control system

Millimeter wave radar sensor assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Even though the SET function is operating, the cruise SET indicator does not illuminate

CAN communication system

Cruise SET indicator light circuit

Combination meter assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

The cruise control indicator remains illuminated

CAN communication system

Combination meter assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

Indicators are not illuminated on the multi-information display in the combination meter assembly

CAN communication system

Combination meter assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

The buzzer does not sound when control of vehicle speed by the dynamic radar cruise control is canceled

CAN communication system

Combination meter assembly

ECM (for 1UR-FE)

ECM (for 3UR-FE)

ECM (for 3UR-FBE)

  • *: If error code 7 is output during beam axis alignment, clear the DTCs and perform beam axis alignment again.
    Precaution

    Road Test

    See More:

    Toyota Tundra Service Manual > Pre-collision System Warning Buzzer: Removal
    REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH Click here 2. REMOVE COWL SIDE TRIM BOARD LH Click here 3. REMOVE INSTRUMENT SIDE PANEL LH Click here 4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Click here 5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Click here 6. REMOVE SKI ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0109