OPERATION CHECK CHECK TIRE PRESSURE WARNING SYSTEM FUNCTION (a) Using the Data List, check that the current tire pressure is normal. Click here (1) Slowly reduce the tire pressure of the front or rear tires and check that the tire pressure on the Data List changes. HINT: For this vehicle, data reception from the tire pressure warning valve and transmitter may worsen while displaying the Data List and it may takes longer than usual to receive data. If data reception worsens while displaying the Data List, rapidly decrease the tire pressure by 20 to 30 kPa (this increases the valve transmission frequency). (2) Further reduce the tire pressure and check that the warning light illuminates. (b) After reducing the tire pressure, set the tire pressure to the specified value. Click here |
Toyota Tundra Service Manual > Navigation System: Illumination for Panel Switch does not Come on with Tail Switch ON
PROCEDURE 1. CHECK VEHICLE SIGNAL (OPERATION CHECK) (a) Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page )] (b) Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation. OK: Light Control Swi ...
