CHECK MODE PROCEDURE 1. LIST OF OPERATION METHODS By operating each of the A/C control switches as shown in the diagram below, it is possible to enter the diagnostic check mode.  |
Toyota Tundra Service Manual > 1ur-fe Starting: Acc Cut Relay
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. REMOVE ACC CUT RELAY (a) Remove the clip. (b) Detach the 2 clips and remove the cowl side trim board RH. (c) Remove the relay. 2. INSPECT ACC CUT RELAY (a) Measure the resistance according to the value(s) in the table below. Standard Resistanc ...
