Toyota Tundra Service Manual: Removal

Toyota Tundra Service Manual / Vehicle Interior / Door Lock / Door Control Switch(for Front Lh) / Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT ARMREST UPPER BASE PANEL LH

(a) Using a moulding remover A, detach the 2 clips and 5 claws, and remove the front armrest upper base panel LH.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

(b) Disconnect the connector.

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax

2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY)

(a) Remove the 3 screws and power window regulator master switch assembly (door control switch assembly).

Text in Illustration

*A

for Regular Cab

*B

for Double Cab, for CrewMax
    Installation

    Door Control Switch(for Front Rh)

    See More:

    Toyota Tundra Service Manual > Brake Actuator: Installation
    INSTALLATION CAUTION / NOTICE / HINT NOTICE: In case of replacing the skid control ECU, perform the zero point calibration of the steering angle sensor, master cylinder pressure sensor, and yaw rate and deceleration sensor (See page ). PROCEDURE 1. INSTALL BRAKE ACTUATOR ASSEMBLY (a) Tighten the 3 n ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0317