CUSTOMIZE PARAMETERS CUSTOMIZE KEY REMINDER WARNING SYSTEM (a) Customizing with the Techstream (1) Connect the Techstream to the DLC3. (2) Turn the ignition switch to ON. (3) Turn the Techstream on. (4) Enter the following menus: Customize / Warning. (5) Select the setting by referring to the table below. NOTICE: Be sure to record the current value before customizing. Warning
|
Toyota Tundra Service Manual > Engine Unit: Inspection
INSPECTION PROCEDURE 1. INSPECT CYLINDER HEAD SET BOLT (a) Using a vernier caliper, measure the length of the cylinder head bolt from the seat to the end. Standard length: 141.3 to 142.7 mm (5.56 to 5.62 in.) Maximum length: 143.7 mm (5.66 in.) If the length is more than the maximum, replace the cyl ...
